BasX-A100 Emotiva Stereo Flex Amplifier Black
https://radiotvcentre.pk/ offers the best BasX A100 Emotiva Amplifier at the best price in Pakistan with a quick delivery service to all over Pakistan. So why wait? Just place your order now before it gets out of stock.
The BasX A100 is built to last, with a heavy-duty steel chassis, solid milled aluminum faceplate, and high-quality parts and construction throughout.
Power Output: 50 watts / channel RMS; 8 Ohms; 20 Hz – 20 kHz; <0.05% THD; both channels driven (FTC). 80 watts / channel RMS; continuous; into 4 ohms, Frequency Response: 20 Hz to 20 kHz + / – 0.08 dB at 1 watt (- 1 dB at 80 kHz), S/N Ratio: > 110 dB (A-weighted; ref full output).
Below are the more details of this product.
ORDER GUIDELINE :
When you order from radiotvcentre.pk, you will receive a confirmation email. You can choose your preferred shipping method on the Order Information page during the checkout process. The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time. Processing time: The time it takes to prepare your item(s) to ship from our warehouse.
This includes preparing your items, performing quality checks, and packing for shipment. Shipping time: The time for your item(s) to travel from our warehouse to your destination. Shipping from your local warehouse is significantly faster. Some charges may apply. In addition, the transit time depends on where you’re located and where your package comes from. If you want to know more information, please contact customer service. We will settle your problem as soon as possible. Enjoy shopping at Radio TV Centre? You Can also visit our Facebook Page!
| Brands | Emotiva |
|---|
| Color | Black |
|---|
| Appliances Type | Stereo Amplifier |
|---|
BasX-A100 Emotiva Stereo Flex Amplifier Black
EMOTIVE AMPLIFIER SPECIFICATIONS
ANALOG INPUTS:
Unbalanced (RCA); one stereo pair
ANALOG OUTPUTS (LOOP):
Unbalanced (RCA); one stereo pair
INPUT SENSITIVITY (FOR FULL OUTPUT):
600mV (8 ohm load)
SPEAKER OUTPUTS:
5-way binding posts; one stereo set
MINIMUM RECOMMENDED LOAD IMPEDANCE:
4 ohms (which equals one 4 ohm load or two paralleled 8 ohm loads per channel)
POWER OUTPUT:
- 50 watts/channel RMS; 8 ohms; 20Hz-20kHz; <0.05% THD; both channels driven (FTC)
- 80 watts/channel RMS; continuous into 4 ohms
HEADPHONE OUTPUT:
Front panel jack; full sized 1/4”
- Headphone output is derived from the main speaker outputs via high quality 220 ohm resistors.
- Optional high-power mode for driving low-efficiency planar headphones
HEADPHONE OUTPUT POWER (NORMAL MODE):
- 8 ohms: 60mW/channel
- 33 ohms: 200mW/channel
- 47 ohms: 250mW/channel
- 150 ohms: 430mW/channel
- 300 ohms: 440mW/channel
- 600 ohms: 350mW/channel
HEADPHONE OUTPUT POWER (DIRECT DRIVE MODE):
(requires internal jumper; USE WITH CAUTION)
- 8 ohms: 50 watts/channel
- 33 ohms: 12 watts/channel
- 47 ohms: 8.5 watts/channel
- 150 ohms: 2.6 watts/channel
- 300 ohms: 1.3 watts/channel
- 600 ohms: 0.6 watts/channel
S/N RATIO:
> 110dB (A-weighted; ref full output)
FREQUENCY RESPONSE:
20Hz to 20 kHz + 0.08dB @ 1 watt (-1dB @ 80kHz)
FRONT PANEL CONTROLS AND INDICATORS:
Volume; analog potentiometer with machined aluminum knob and illuminated status ring
REAR PANEL CONTROLS:
AC Power switch, Line Voltage (protected slide switch), Trigger Switch (mode) (On, Off, Auto)
TRIGGER AND CONTROL:
Trigger Input: 5-12 VDC, auto-sense of audio input signal
TRIGGER OUTPUT:
direct hardware feed through of input trigger signal
PROTECTION:
The BasX A-100 is protected against all common fault conditions. The status ring will blink amber when a fault is detected.
POWER REQUIREMENTS:
115VAC or 230VAC + 10% @ 50/60Hz (selectable by rear-panel switch)
DIMENSIONS:
8.5” wide x 3.125” high x 15” deep (includes feet, binding posts, and volume knob)
WEIGHT:
11.8lbs; 15lbs (packaged)
